Datalogic Matrix 300 Reference Manual page 33

INTRODUCTION
2
Standard Application Program
A Standard Application Program is factory-loaded onto Matrix 300™. This program controls
code reading, data formatting, serial port and Ethernet interfacing, and many other operating
and control parameters. It is completely user configurable from a Laptop or PC using the
dedicated configuration software program VisiSet™, provided on Mini-DVD with the reader.
There are different programmable operating modes to suit various code reading system
requirements.
Quick, automatic focus, positioning, calibration and code setting of the imager can be
accomplished using the X-PRESS™ button and LEDs on top of the reader without the
necessity of a PC.
The previous functions can also be performed through VisiSet™ through the Setup Wizard.
This tool includes visual feedback from the reader.
VisiSet™ provides a Calibration Tool to verify the exact positioning of the reader and to
maximize its reading performance.
Statistics on the reading performance can also be visualized through a dedicated window in
VisiSet™.
Programmability
If your requirements are not met by the Standard Application Program, Custom Application
Programs can be requested at your local Datalogic distributor.
Some of the main features of this reader are given below:
Excellent Performance
 1.3 MPixels (SXGA)
 Adjustable focus through Software controlled Liquid Lenses
 Powerful Internal Lighting Systems
 Outstanding decoding capability on 1D, 2D, Stacked, Postal symbologies
 Excellent performance on DPM applications
 Omni-directional reading
 Frame Rate up to 60 frames/sec
 Region Of Interest Windowing for higher frame rate
 Up to 100 readable codes in a single frame
21