Datalogic Matrix 300 Reference Manual page 124

7
Environmental Parameters regard the device Identity and Position in a Network (ID-NET™,
Ethernet, Fieldbus) and are not influenced by the "Send Default Configuration" and "Send
Configuration" commands. This allows individual devices to be configured differently without
affecting their recognized position in the network.
The following is a list of the Environmental Parameters:
READING SYSTEM LAYOUT
- Device Network Setting
- Number of Slaves
DEVICE NETWORK SETTINGS
- Topology Role
- ID-NET Slave Address
- Network Baud Rate
- Acquisition Trigger String
- Reading Phase ON String
- Reading Phase OFF String (available only in Multidata configuration)
- Header String
- Terminator String
- Link Failure String
- Link Failure Timeout (ms)
EXPECTED SLAVE DEVICES
- Status
- Device Description
- Device Network Name
MAIN PORT
- Communication Protocol
ETHERNET SYSTEM (on board)
- Status
- DHCP Client
- IP Address
- Subnet Mask
- Gateway Address
- DNS1 Address
112
(available only in Multidata configuration)
(available only in Multidata configuration)
(available only in Slave Multidata configuration)
(available only in Slave Multidata configuration)
(available only in Master Synchronized configuration)
(available only in Master Synchronized configuration)
MATRIX 300™ REFERENCE MANUAL