Changing The Preset Programmes - Danfoss 102E7 Installation And User Manual

Before you change the preset programmes
Your installer will have set your unit to operate in one of the
following modes:
• 7 day - diff erent settings for each day of the week (page
16-17) - default setting
• 5/2 day - one set of programmes for weekdays and another
for weekends (page 18-19)
!
Please follow the correct instructions to programme your unit.
Please Note
The unit must be programmed in sequence and ON/OFF
times cannot be set out of sequence.
If you want to leave a preset time as it is, simply press NEXT
ON/OFF to move on to the next setting
Your clock will allow you to programme 3 ON/OFF settings
per day. If you do not wish to use one of the ON/OFF settings,
simply programme the ON time to be the same as the OFF
time and the setting will not operate.
!
If at any time you get confused and need to reset your timings
to the standard preset programme, press the R/S button to
return to the preset programmes.
15