Changing The Preset Programmes - Danfoss 103E7 Installation & User's Instructions

Changing the preset programmes

Your installer will have set your unit to operate in one of the
following modes:
● 7 day - different settings for each day of the week
(page 16-17) - default setting
● 5/2 day - one set of programmes for weekdays and
another for weekends (page 18-19)
!
Please follow the correct instructions to programme
your unit.
Please Note
The unit must be programmed in sequence and ON/
OFF times cannot be set out of sequence.
If you want to leave a preset time as it is, simply press
NEXT ON/OFF to move on to the next setting
Your clock will allow you to programme 3 ON/OFF
settings per day. If you do not wish to use one of the
ON/OFF settings, simply programme the ON time to
be the same as the OFF time and the setting will not
operate.
!
If at any time you get confused and need to reset your
timings to the standard preset programme, press the
R/S button to return to the preset programmes.
15