Factory Preset Programmes; Setting The Programme - 7 Day; Setting The Programme - 5/2 Day - Danfoss 102E7 Installation And User Manual

Use the + or - buttons to set the correct time (press and hold
to change in 10 minute increments).
Setting the Day
The day of the week is set automatically. Press PROG to exit
into RUN mode.
Factory Presets
The unit is supplied with the following preset programme which
will be active after the unit has been reset.
1st ON
1st OFF
2nd ON
2nd OFF
3rd ON
3rd OFF
NB. 2nd ON and 2nd OFF are set to the same time. These 2 times
are ignored by the programme therefore the heating will just
come on once in the morning and once in the evening. If you
want the heating to come on in the middle of the day set the
2nd ON and 2nd OFF to the times you require.
Accepting the preset times
If you are happy to use the settings above, you don't need to
do anything else.
To accept
PROGRAMME button until the colon in
the display begins to fl ash.
Your unit is now in RUN mode.
14
Mon-Fri
6.30am
8.30am
12.00pm
12.00pm
5.00pm
10.30pm
the presets press the
Sat-Sun
7.30am
10.00am
12.00pm
12.00pm
5.00pm
10.30pm