Factory Preset Programmes - Danfoss 103E7 Installation & User's Instructions

Factory Presets
The unit is supplied with the following preset programme
which will be active after the unit has been reset.
1st ON
1st OFF
2nd ON
2nd OFF
3rd ON
3rd OFF
NB. 2nd ON and 2nd OFF are set to the same time.
These 2 times are ignored by the programme therefore
the heating will just come on once in the morning and
once in the evening. If you want the heating to come on in
the middle of the day set the 2nd ON and 2nd OFF to the
times you require.
Accepting the preset times
If you are happy to use the settings above, you don't
need to do anything else.
To accept the presets press the
PROGRAMME button until the colon
in the display begins to fl ash.
Your unit is now in RUN mode.
14
Mon-Fri
6.30am
8.30am
12.00pm
12.00pm
5.00pm
10.30pm
Sat-Sun
7.30am
10.00am
12.00pm
12.00pm
5.00pm
10.30pm