Rs-232C Serial Cable Installation - Sam4s ER-280 SERIES Service Manual

3. Installation and Operation
3-2 Installation

3-2-3 RS-232C Serial Cable Installation

1. Open the I/F Door.
2. Connect the RS-232C serial cable to the RS-232C serial port on the rear side of ECR.
3. Secure the serial cable with screws.
4. Connector the other end of the RS-232C serial Cable to your host computer.
3-2-4 Options
No. Item
1 Water Proof
2 Memory
3 Pulley Winding
3-2-5 Supplies
No. Item
1 Paper Roll
2 Mode Key
3 User Manual
4 Spool
3-4
Figure 3-4. Cable Installation
Description
Raised Keyboard (Option)
SRAM 4MBITs (4MBITs * 1)
Spool motor & Pulley
Table 3-1. Option
Description
1 EA
VD, REG, X, Z, P, C : NON FISCAL
REG, X, Z, P, C : FISCAL
1 EA
1 EA
Table 3-2. Supplies
Remark
On Main PBA
Factory option
Remark
SAM4S ER-280 SERIES