DFI PT880-ALE User Manual page 60

3
BIOS Setup
3.1.3.2 AGP & P2P Bridge Control
Move the cursor to this field and press <Enter>. The following
screen will appear.
The settings on the screen are for reference only. Your version may not be identical
to this one.
AGP Aperture Size
This field is relevant to the memory-mapped graphics data of the
AGP card installed in your system.
AGP 2.0 Mode
This field is used to select the AGP mode of the AGP card installed
on the system board.
AGP Driving Control
Set this field to Manual only if there are compatibility problems
with some AGP cards. When set to Manual, select a value in the
"AGP Driving Value" field.
AGP Driving Value
This field is used to select a value for the AGP Driving control. We
recommend that you leave this field in its default setting.
AGP Fast Write
Select Enabled to support the AGP Fast Write function.
60