Table of Contents
Advertisement
2
Hardware Installation
If you are using USB 2.0 devices, install the "VIA USB 2.0 Driv-
ers". Refer to chapter 4 for more information.
Wake-On-USB Keyboard/Mouse
The Wake-On-USB Keyboard/Mouse function allows you to use a
USB keyboard or USB mouse to wake up a system from the S3
(STR - Suspend To RAM) state. To use this function:
• BIOS Setting:
"USB Resume from S3" in the Power Management Setup
submenu ("IRQ/Event Activity Detect" section) of the BIOS
must be set to Enabled. Refer to chapter 3 for more informa-
tion.
32
Advertisement
Table of Contents
