Table of Contents
Advertisement
2.5.5 Universal Serial Bus Ports
USB 2
USB 1
USB 4
USB 3
The system board supports 8 USB 2.0/1.1 ports. Four onboard
USB ports (Black) are at locations CN7 (USB 1-2) and CN8
(USB 3-4) of the system board.
J4 (USB 5-6) and J5 (USB 7-8) connectors allow you to connect
4 additional USB por ts. The additional USB por ts may be
mounted on a card-edge bracket. Install the card-edge bracket to
the system chassis then insert the connector that is attached to
the USB port cables to J4 or J5.
BIOS Setting
Configure the USB ports in the Integrated Peripherals submenu
("VIA OnChip PCI Device" section) of the BIOS. Refer to chapter
3 for more information.
Driver Installation
You may need to install the proper drivers in your operating
system to use the USB device. Refer to your operating system's
manual or documentation for more information.
Hardware Installation
USB 5-6
USB 7-8
10
2
1
9
31
2
Advertisement
Table of Contents
