DFI PT880-ALE User Manual page 77

3.1.6 PnP/PCI Configurations
This section shows how to configure the PCI bus system. It cov-
ers some very technical items and it is strongly recommended
that only experienced users should make any changes to the de-
fault settings.
The settings on the screen are for reference only. Your version may not be identical
to this one.
3.1.6.1 PNP OS Installed
The default setting is "No". The BIOS will detect the Plug and
Play devices for some compatible resources.
3.1.6.2 Reset Configuration Data
Enabled The BIOS will reset the Extended System Configura-
tion Data (ESCD) once automatically. It will then rec-
reate a new set of configuration data.
Disabled The BIOS will not reset the configuration data.
3.1.6.3 Resources Controlled By
The Award Plug and Play BIOS has the capability to automatically
configure all of the boot and Plug and Play compatible devices.
Auto(ESCD) The system will automatically detect the settings
Manual
for you.
Choose the specific IRQ resources in the "IRQ
Resources" field.
BIOS Setup
77
3