Mytee 8070 -Lite Instructions Manual page 4

8070 MYTEE-LITE™
FILL SOLUTION TANK
Remove vacuum tank to fill solution tank (See release latch
portion). For best results, fill with warm water (140 o F).
ATTACH VACUUM HOSE TO VACUUM INLET
Connect hose attachment for vacuuming.
ATTACH HOSE
Firmly attach hose and quick disconnect. Make sure quick discon-
nects snap together firmly. Once attached to unit connect Q.D. to
upholstery tool. Always inspect hoses for cracks or fraying.
After the machine has been plugged into a 20 amp grounded
outlet, turn on pump. Key tool until upholstery tool releases a
steady flow.
4
PUMP