Table of Contents
Advertisement
To make a call
1.
Key in the telephone number (If you make a mistake, press CLEAR button to clear digits
from the display. To clear all digits, press and hold CLEAR button.)
2.
Press the CALL button.
Or you also can dial the stored number through UP/DOWN button.
Note: You can dial the number after you press the CALL button if you need, but you won't be able
to correct any mistakes if you do it in this way.
When you dial the outside line access digit (e.g. 9) then the telephone number, press and hold the
"#" button about 2 seconds for a pause.
To redial a call
In standby mode, press and hold the CALL button to enter the dial list, and press the UP/DOWN
button to scroll through the number you want to dial, then press the CALL button to redial.
To answer a call
When the handset and base unit ring, press the CALL button to answer a call, and the symbol
or
appears in the display.
When the AUTO TALK is turned on, you can simply answer the call by lifting the handset from the
base unit (see AUTO TALK part).
To end a call
Press the END button to end a call.
Earpiece volume
During a call, to adjust the volume of the earpiece:
Press the UP or DOWN button to change the volume (1 to 10).
Muting the mouthpiece
•
During a call, if you want the person on the other hand end cannot hear you; press Mute
once to mute the mouthpiece;
•
While the mouthpiece is muted, you cannot press any number key to send digits down the
line; Press CLEAR key again to get back to the call.
Conference Calling
You need to register with your fixed line network operator for conference calling service. It is
dependant on service availability and subscription.
To Make Conference Call:
1. Connect the first party;
Press INT button, and the first party is put on hold;
2.
Dial second party's phone number;
3.
When connected, press and hold "#" button to connect the three parties together.
4.
PHONE BOOK
Up to 30 records could be stored in each handset's Phone Book. Each record can store up to 20
digits, and names of up to 8 characters could be stored with the number. In standby mode, press
UP/DOWN button to show phonebook list. There are two ways to enter phonebook.
In standby mode, press OK button to enter phonebook; or through MENU and UP/DOWN button to
enter phonebook.
8
Advertisement
Table of Contents
