Function Key Operation; Del Key - Denver DPC-21 User Manual

DPC-21 User Guide
CODE, press SET key to enter this mode. Use UP/DOWN key to select
value, then press SET key to move to next item.
Area Code can be used to filter the number for incoming calls. E.g.
Area code = 75 when there is incoming call with 75 6554556, it will be
displayed as 655 4556 only.
LONG CODE LCD panel displays SET 3 PCODE, press SET key to enter this mode.
LCD displays PCODE, use UP/DOWN key to select value, then press SET
key to move to next item.
To activate this feature, while checking incoming calls using UP key,
press REDIAL key twice to add the LONG DIST ACCESS code in front of
the number.
AUTO-IP LCD display SET 4 AUTO IP, press SET key to enter this mode. LCD
display AUTO IP OFF and OFF will flashes, use UP/DOWN key to select
value. When LCD displays AUTO IP ON, press SET key. Then the LCD will
display INPUT CODE for you to enter the IP numbers. Use DEL key to
correct any wrong input. After entered all IP number, press SET key to
enter into next item. The outgoing call will automatically use IP mode.
After you have set a number on Auto IP, e.g. 1455. If you need to call
any number that starts with 14550, just type 0 to represent 1455 then
follow by the subsequent numbers. To illustrate:
1. Press 0 288888 follow by REDIAL button
2. The telephone will call out 1455 0 288888.
PULSE/TONE LCD display SET 5 P-T, press SET key to enter this mode. LCD display
MODE TONE. Use UP/DOWN key to change it into PULSE, press SET key to
move to next item.
ANTI SHARE LCD display SET 6 ALAr, press SET key to enter this mode. LCD display
ALAr OFF. Use UP/DOWN key to change it into ON, press SET key to
move to next item.
The Anti Share feature is to ensure other telephone is unable to share
the same line as your telephone. If another telephone is sharing the
same line, there will be constant noise when it is off hook.
ALARM LCD display SET 7 ALERT, press SET key to enter this mode. LCD
display 1 00-00 OFF. Press SET to navigate on the HOUR/MINUTE. Use
the UP/DOWN key to change the values. Change OFF to ON to enable
the alarm function. You can set up to 3 alarms and the telephone will
ring at the time set.

4. FUNCTION KEY OPERATION

DEL key

In any mode, when checking the incoming and outgoing call, press DEL key to delete the
number you are checking. Press and hold DEL key for 4 sec and it will delete all incoming call
5
Denver