Table of Contents
Advertisement
USE
LAST NUMBER REDIAL AND CALLER ID LOG
The telephones have a outgoing (last number redial) memory log. It can store up to 5 set of outgoing
calls.
User can review the LNR by press the RP/UP button, Press the
EXPLANATION OF CALLER ID
Caller display allows you to see who is calling before you answer a call and to see who has called in
your absence. When the service is implemented on your telephone line, seconds before your
telephone rings the number of the incoming caller will appear on the display. Up to 10 unanswered
incoming calls will be stored by handset. When the list is full, the oldest number will be deleted
automatically.
If the calling number is already present in the phonebook of your handset, the name in the phonebook
entry is shown in the call register.
Note: You are recommended to store the full telephone number with the STD code in the phonebook
memory so that the associated name can be displayed.
Each entry in the caller list has:
•
Caller name (up to 10 characters) if this is stored in the phonebook or supplied from the
telephone network.
•
Caller number ( up to 20 digits)
REDIAL VIEWING CALLER DISPLAY NUMBERS
During the handset standby mode, press the CID button
1.
The handset display shows number of CID record.
2.
Press the CID button repeatedly to select the number and you want to check, press
3.
will now automatically dial the number
Press the menu shows TIME
4.
Press the OK button to check the time stamp.
5.
ERASE CALLER DISPLAY NUMBERS
1. During the handset standby mode, press the CID button
2. The handset display shows number of CID record.
3. Press the CID button repeatedly to select the number and you want to check
button
- 13 -
the phone
Advertisement
Table of Contents
