Media>> Audio - EnGenius EDS1130 User Manual

Media>> Audio
Status:
If the audio is important to what you are monitoring, you need to set the audio status to Enable. So that the microphone can pick
up sounds in the environment. On the other hand, if audio is not necessary (for instance an open space with a lot of noises), you are
advised to Disable the audio to reduce the clips file size.
Mode:
Both Mic & Speaker: enable both microphone and speaker
Only Mic: enable only the microphone
Only Speaker: enable only the speaker
Microphone (Input) Gain: setting the sensitivity of the microphone. High gain will result in higher volume and but may possibly picks
up more noise.
Encoding: supporting encoding type is G711A, AAC and G711U
Sample Rate:
8 K
Bit Rate: 16 Bit
Speaker (Output) Volume: adjusting speaker volume by sliding the bar
Chapter5 | User Interface
89