EnGenius EDS1130 User Manual page 122

On your gateway's/router's Main Menu, Click
Depending on the firmware version of the device, the page may be found on
Note: Only EnGenius Cameras
to configure them one by one manually.
You should be see all your cameras listed on the IP Camera Client Table. If not, click Refresh button to scan the network again.
Please be noted that only EnGenius Cameras will be listed on the table.
Chapter6 | Camera Connecting to EnGenius Gateway/Router
EnViewer → IP Camera
can be managed collectively by EnGenius Gateway/Router. For other vendor's cameras, you still have
under Cloud Services to access the connected cameras.
System → IP Camera
Connect: You can get access to the selected camera's
User Interface Management page.
Add Profile: Add the selected camera to a profile
(please refer to next section for more detail on
Profile)
under Device Management.
122