Event Server>> E-Mail Alerts - EnGenius EDS1130 User Manual

Event Server>> E-mail Alerts
EDS1130 allows camera to send captured snapshots to the predefined e-mail to notify an event triggered by configured motion or
audio detection.
SMTP is an email sender's server. You need to check whether your e-mail service provider supports SMTP and obtain the required
information for this setting.
Note: The function doesn't support the SMTP server secured by SSL. Please verify your e-mail provider settings ahead.
The snapshots settings can be configured under Chapter 6.1.3 Event Management
Chapter5 | User Interface
→
Event Settings
Account:
the e-mail account name; if your e-mail is myemail@domain.
com, myemail is the account name.
Password: the password you use to login into your e-mail box.
Sender:
you can type in your e-mail address or other address if you
would like the receiver to reply the e-mail to.
SMTP Server: enter the SMTP server address (e.g. smtp.domain.com).
Port:
enter SMTP server port (normally the value is 587 or 465)
Receiver: enter the receiver e-mail here (usually your or the
administrator's e-mail).
Subject:
enter the email subject here.
→
Event Type.
111