Notification - EnGenius EDS1130 User Manual

Notification

Notification is a feature that sends message to your mobile devices when your camera detected predefined events (alarms). You can
register your mobile device by entering a name and turn set
Chapter8 | EnViewer APP
Push Message
Note1: Alarm message will be sent to your mobile device ONLY if you have configured your
camera with at least one of the event types:
Note2: A mobile device can only register itself to the service. That is, if you need both your tablet
and mobile phone be notified about the alarms, each device must have EnViewer installed and
registered for notification individually. As long as your EnViewer AP is running the alarm messages
can be received even if the devices operate in idle mode.
"ON". EnViewer will registered your device immediately.
motion detection
User Management → Push Message
On your camera setting
Mobile List, you can find out what device has been registered.
or audio detection.
157