Tabletop; Wall-Mount - EnGenius EDS1130 User Manual

Tabletop

• Complete the camera assembly. Find a secure location where the monitored space is within the camera view range and adjust
the camera angle focusing on the target area or object.
• Plug in the power adapter to the wall outlet once ready.

Wall-mount

• Detach the camera from the stand for easily installation.
• Find a proper place on the wall where camera is able to aim at the monitored space.
• Once location is determined, mark and drill two pilot holes aligning to the screw holes at the bottom of the camera stand. Once
aligned, put wall anchors into the holes and insert screws into the wall anchor. Screw and secure the stand in place.
• Now, you can attach the camera to the stand. Then, plug in the power adapter to the wall outlet to complete the installation.
Chapter2 Installation
|
12