EnGenius EDS1130 User Manual page 66

Static IP
PPPoE
Dynamic IP (DHCP)
Click Apply when configuration is done to activate new settings.
Chapter5 | User Interface
If your network requires Static IP, you need to specify the detail
IP settings similar to above. Please note that, if you are managing your
camera in local network similar to the example shown above, you will
need to configure your management PC/Laptop under the same domain.
If you are connecting to the Internet without going through
your home gateway/router, you can connect the camera directly to
your modem (given that you are using PPPoE for your Internet service).
Please consult your local network service provider for more detail.
Basically, the PPPoE setting is exactly the same as what your home
gateway/router. You need to provide at least
to get access.
MAC Address: Normally, the MAC address is obtained automatically. To
change the setting, type in the MAC address into the field.
Username and Password
66