EnGenius EDS1130 User Manual page 75

WPS over web page
You can initiate camera's WPS process on the web page.
First, press the WPS button on the gateway/router (there may be changes on the LED lights as signs of initiation).
On camera's WPS page, press Start to Process.
Wait a minute for two devices to establish the wireless connection; when the connectivity is complete, the WPS LED indicator will
become solid green.
WPS
NOTE: For WPS to setup wireless connection successfully, timing is essential. Once the gateway/router has initiated WPS process,
your camera WPS process must be initiated within a given time range. It will be best if you have two devices in close range so that
WPS process on both sides can be initiated immediately after another.
Chapter5 | User Interface
75