Connecting Via Ethernet Cable - EnGenius EDS1130 User Manual

Connecting via Ethernet Cable

Connect the camera to the gateway/router on the LAN ports with a network CAT5 RJ-45 Ethernet cable (shown below). You
may use the cable included in the package for initial setup; however, you may be required to switch to wireless setting or purchase a
longer cable to extend the connecting range.
As a rule of thumb, using an Ethernet cable for optimized connectivity if your camera is close enough to the gateway/router;
and for wall-mount installation, adopting wireless setup will be a better choice. Choose either way for the application you find suitable.
Chapter2 Installation
|
Modem
Gateway/Router
RJ-45 Ethernet Cable
14