EnGenius EDS1130 User Manual page 68

Default UID: Each device is distributed with an exclusive unique identification (UID). You can find the default UID shown here.
UID Status:
when working properly, it should show "Connected".
Default DDNS: Each device is distributed with an exclusive DDNS. You can find the default DDNS shown here.
Alias DDNS Name: You may find that your DDNS is too difficult to remember. EnGenius provides free DDNS name registration as long
as the alias is not yet been taken other EnGenius product users. You can check the availability by clicking on the button
Check
for verification. For example, if "superman" is available and when the setting is activated, both DDNS name "superman.
engeniusddns.com" and "ooooooo.engeniusddns.com" can be used to access this camera.
Refresh Time: options are 3HRs, 6HRs, 9HRs, 12HRs and 24HRs. DDNS server needs to synchronize with your IP address often so
that you can access your device over the Internet with DDNS name. Depends on your Internet Service provider, your WAN IP address
lease time will be different. You can check with your local Internet Service provider for WAN IP address refresh time. The default
setting is 24 HRs (which means DDNS server will check the synchronization every 24 hours). Normally, the default setting 24 HRs is
okay for most cases.
DDNS Status: when working properly, it should show "Connected".
Note: DDNS will only work only if your gateway/router is connected to the Internet. If gateway/router is not connected to the
Internet, your DDNS status will show "Disconnected".
Chapter5 | User Interface
Availability
68