EnGenius EDS1130 User Manual page 37

Intelligent ip-camera
Hide thumbs Also See for EDS1130:
Table of Contents

Advertisement

When installation is completed, open the browser and login into the camera again. You should be able to see the camera viewer
in live as shown below. If you do not see the viewer that means you did not install WebCMS properly or try login using other browsers.
NOTE:
If you are seeing grey color in the viewer, it is because the camera has detected insufficient of light in the room and
enabled night vision mode automatically. If you point your camera to a brighter space you should be able see it switched to normal
color mode. Try a few places to get a feeling of how it works. You may hear the sound "click" from the camera when night vision is
switched on and off if you listen closely.
Congratulations, you are now ready to proceed to further camera settings!
Chapter4 | Basic Settings
37

Advertisement

Table of Contents
loading

Table of Contents