System>> Time - EnGenius EDS1130 User Manual

System>> Time
Like any other surveillance system, time is essential because we want to keep track of the time of the events recorded or
detected by the camera. By default, the camera is connected to a public time server (pool.ntp.org) and its time is always synchronized
with the server over the Internet. Normally, you only need to change the
Leave the other setting as default should be fine. Setting the wrong time server or time zone will result in inaccurate scheduling and
time stamp.
Time Setup: select how the camera obtains the current time
Time Zone: select time zone for the camera
NTP Time Server:
enter the domain name or IP address of an NTP server.
Enable Daylight Saving: Tick to enable or disable daylight saving time if applicable.
Start Time: select the date and time when daylight saving time starts.
End Time:
select the date and time when daylight saving time ends.
Click Apply to save the settings or Cancel to discard changes.
Chapter5 | User Interface
Time Zone. Choose the one that matches your location.
56