6A-70 ENGINE MECHANICAL (C22NE, 22LE, 20LE)
FUEL INJECTION SYSTEM
MAP SENSOR
Removal
1.
Disconnect the battery cable.
2.
Disconnect the electrical connector from the sensor.
3.
Remove the mounting bolts securing the sensor to the
manifold.
4.
Remove the sensor from the intake manifold.
Installation
1.
Push MAP sensor into the manifold.
2.
Install the mounting bolts and tighten them.
3.
Connect electrical connector.
4.
Connect the battery cable.
Pressure Regulator
Removal
1.
Remove vacuum hose.
2.
Remove fuel hoses.
3.
Remove pressure regulator.
Installation
1.
Install pressure regulator.
2.
Install fuel hoses.
3.
Install vacuum hoses.
ECM (Engine Control Module)
Removal
1.
Remove the center console assembly.
2.
Remove the ECM cover.
3.
Remove 3 screws for the bracket.
4.
Pull ECM out.
5.
Disconnect the connectors.