Ect; Idle Air Control(Iac) Valve; Ignition Coil - Isuzu C22NE Workshop Manual

ENGINE MECHANICAL (C22NE, 22LE, 20LE) 6A-71
Installation
1. Connect the connectors.
2. Install ECM to the proper position.
3. Tighten 4 screws to the bracket.
4. Install the ECM cover.
5. Install the center console assembly.

ECT

Removal
1. Remove wiring harness plug and coolant temperature
sensor.
Tighten (Torque)
Temperature sensor to intake pipe - 10 N⋅m (1.0 kgf⋅m)
Wiring harness plug to temperature sensor
Inspection
Coolant level
Idle Air Control (IAC) Valve
Removal
1. Remove wiring harness plug, hose clamps and idle
speed adjuster.
Installation
1. Install idle speed adjuster, hose clamps and wiring
harness plug.

Ignition Coil

Removal
1. Remove 2 bolts, plug and ignition coil.
Installation
1. Install ignition coil, plug and bolts.