6A-20 ENGINE MECHANICAL (C22NE, 22LE, 20LE)
OPERATIONS ON ENGINE AGGREGATES
Engine Damping Blocks (Engine Without
Transmission)
Removal
1.
Remove bonnet.
2.
Remove radiator.
3.
Remove air inlet hose.
4.
Remove power steering pump drive belt and power
steering pump from engine.
5.
Remove all cable connections, hoses and lines from
engine.
6.
Remove accelerator cable from inlet pipe.
7.
Remove exhaust pipe from manifold.
8.
Remove lower nine bolts and transmission from engine
block.
9.
Remove clutch slave cylinder and allow to hang free.
10.
Remove starter from engine block.