3
Legend
1 Water Pump Assembly
Water Pump
Water Pump and Associated Parts
1
2
2 O-Ring
3 Bolt
Removal
1. Disconnect battery ground cable.
2. Drain coolant.
3. Radiator hose (on inlet pipe side).
4. Remove timing belt, refer to "Timing Belt" in this manual.
5. Remove water pump assembly.
Inspection
Make necessary repair and parts replacement if extreme wear
or damage is found during inspection. Should any of the
following problems occur, the entire water pump assembly
must be replaced:
• Crack in the water pump body
• EC leakage from the seal unit
ENGINE COOLING 6B-7