Operations On Cylinder Head And Camshaft Housing; Camshaft - Isuzu C22NE Workshop Manual

6A-36 ENGINE MECHANICAL (C22NE, 22LE, 20LE)
OPERATIONS ON CYLINDER HEAD AND CAMSHAFT
HOUSING

Camshaft

Removal
1. Remove cylinder head according to the corresponding
operation.
2. Remove camshaft housing from cylinder head and lay
housing on base provided
3. Remove rear sealing gasket and plate camshaft housing
with taking care not to damage housing.
4. Remove thrust plate.
5. Remove camshaft.
6. Remove front sealing gasket and plate from camshaft
housing with taking care not to damage housing.
Inspection
All parts.
Installation
1. Install camshaft.
2. Coat sliding surfaces with molybdenum disulphate paste.
Tighten (Torque)
Thrust plate for camshaft housing - 8 N⋅m (0.8 kgf⋅m)