Table of Contents
Advertisement
6E1-260 DRIVEABILITY AND EMISSIONS
OIL PRESSURE SWITCH
Removal
1.
Disconnect battery negative cable.
2.
Disconnect electrical connector at Oil Pressure Switch.
3.
Unscrew Oil Pressure Switch from Oil Filter Mounting
Housing.
Installation
1.
Install Oil Pressure Switch into Oil Filter Mounting
Housing and tighten. Tighten the screws to 30 -50Nm
(3.1 -5.1kgf⋅m).
2.
Connect electrical connector.
3.
Connect battery negative cable.
Advertisement
Chapters
Table of Contents
