System Specifications - Nimbus Water Systems WaterMaker Five WM5-50 User Manual

Dimensions and Weight
System - 9.75" W x 13.5" D x 15.5" H ( 24.8 x 34.3 x 39.4 cm), 11 lbs. (5 kg.)
Shipping Box - 14.5"L x 11.25"W x 20"H (36.8 x 28.6 x 50.8 cm), 13.7 lbs. (6.2 kg.)
I
L
K
J
(behind cover)
This system has been designed for installation by a licensed professional such as a contractor or plumber. Proper completion of this installa-
tion will require basic familiarity with standard sink plumbing and proper use of common hand and power tools. Improperly installed systems
could result in water damage due to leaks or flooding.
Performance Specifications
Membrane Production
System
Production
TDS Rejection
Recovery
1
System tested at 50 psig, 750ppm TDS at 77°F.
The percentage of the feed water available
1
as reverse osmosis treated water under
normal operating conditions.
Do not use with water that is microbiologically unsafe or of unknown quality

System Specifications

D
G
E
F
M
H
B
C
(not shown)
A
Feed Water Requirements
50 GPD Pressure
Temp
14.61GPD TDS
96.5% Chlorine
26.76% Turbidity
SDI
pH
Feed water must be potable, municipal water. Must
be free of potential membrane foulants such as Iron,
Hydrogen Sulfide and Manganese.
without adequate disinfection before or after the system.
42445 Avenida Alvarado, Temecula, CA 92590
(800) 451-9343 · www.nimbuswater.com
A. Product water storage tank
B. Tank valve
C. Tank tubing (3/8" white)
D. Air-gap faucet
E. Drain connection assembly
F. Drain tubing (3/8" white)
G. Quick connect fitting
H. Drain tubing (1/4" black)
I. Faucet tubing (3/8" blue)
J. Four-stage desalinator
K. Feed water tubing (1/4" green)
L. Feed valve assembly (with adapter
and shut-off valve).
M. Carbon post-filter
40-80 psi (275 kPa - 552 kPa)
40°F - 100°F (4°C - 38°C)
<2000 mg/L
<1.0 mg/L
<1 NTU
<5
4-8
8