System Specifications - Nimbus Water Systems Five Water Maker WM5-50 Quick Manual

Performance Specifications
Membrane
Production
(189 LPD)
TDS Rejection
Recovery
1
Brine to Product
The percentage of the feed water available as reverse osmosis treated
1
water under normal operating conditions.
Tested at 60 psig (4 bar), 500ppm TDS municipal water, 77°F (25°C)
Dimensions and Weight
System - 9.72" W x 13.75" D x 15.38" H ( 24.7 x 34.9 x 39.1 cm), 11 lbs. (5 kg.)
Shipping Box - 14.5"L x 11.25"W x 20"H (36.8 x 28.6 x 50.8 cm), 13.7 lbs. (6.2 kg.)
I
L
K
J
)
(behind cover)
This system has been designed for installation by a licensed professional such as a contractor or plumber. Proper completion of this
installation will require basic familiarity with standard sink plumbing and proper use of common hand and power tools. Improperly
installed systems could result in water damage due to leaks or flooding. Do not use with water that is microbiologically unsafe.

System Specifications

System w/Tank
50 GPD 27 GPD
(102 LPD)
95% 95%
35.4% 22.8%
1.8:1 3.4:1
D
G
F
M
H
B
C
(not shown)
A
41840-A McAlby Court, Murrieta, CA 92562
(800) 451-9343, email: sales@nimbuswater.com
Feed Water Requirements
Pressure 40-80 psi (275 kPa - 552 kPa)
Temp 40°F - 100°F (4°C - 38°C)
TDS <2000 mg/L
Chlorine <1.0 mg/L
Turbidity <1 NTU
SDI <5
pH 4-8
Feed water must be potable, municipal water. Must
be free of potential membrane foulants such as Iron,
Hydrogen Sulfide and Manganese.
A. Product water storage tank
B. Tank valve
C. Tank tubing (3/8" white)
D. Air-gap faucet
E
E. Drain connection assembly
F. Drain tubing (3/8" white)
G. Quick connect fitting
H. Drain tubing (1/4" black)
I. Faucet tubing (3/8" blue)
J. Four-stage desalinator
K. Feed water tubing (1/4" green)
L. Inlet fitting with shut-off
M. Carbon post-filter
4