System Specifications - Nimbus Water Systems WaterMaker Five WM5-50 Instruction

Dimensions and Weight
System - 9.75" W x 13.5" D x 15.5" H ( 24.8 x 34.3 x 39.4 cm), 11 lbs. (5 kg.)
Shipping Box - 14.5"L x 11.25"W x 20"H (36.8 x 28.6 x 50.8 cm), 13.7 lbs. (6.2 kg.)
I
L
K
J
)
(behind cover)
This system has been designed for installati on by a licensed professional such as a contractor or plumber. Proper completi on of this installa-
ti on will require basic familiarity with standard sink plumbing and proper use of common hand and power tools. Improperly installed systems
could result in water damage due to leaks or fl ooding.
Performance Specifi cati ons
Membrane Producti on
System
Producti on
TDS Rejecti on
Recovery 1
System tested at 50 psig, 750ppm TDS at 77°F.
1 The percentage of the feed water available
as reverse osmosis treated water under
normal operati ng conditi ons.
Do not use with water that is microbiologically unsafe or of unknown quality
System Specifi cati ons
D
G
F
M
H
B
C
(not shown)
A
Feed Water Requirements
50 GPD Pressure
Temp
14.61GPD TDS
96.5% Chlorine
26.76% Turbidity
SDI
pH
Feed water must be potable, municipal water. Must
be free of potenti al membrane foulants such as Iron,
Hydrogen Sulfi de and Manganese.
without adequate disinfecti on before or aft er the system.
41840-A McAlby Court, Murrieta, CA 92562
(800) 451-9343 · www.nimbuswater.com
A. Product water storage tank
E
B. Tank valve
C. Tank tubing (3/8" white)
D. Air-gap faucet
E. Drain connecti on assembly
F. Drain tubing (3/8" white)
G. Quick connect fi tti ng
H. Drain tubing (1/4" black)
I. Faucet tubing (3/8" blue)
J. Four-stage desalinator
K. Feed water tubing (1/4" green)
L. Inlet fi tti ng with shut-off
M. Carbon post-fi lter
40-80 psi (275 kPa - 552 kPa)
40°F - 100°F (4°C - 38°C)
<2000 mg/L
<1.0 mg/L
<1 NTU
<5
4-8
8