Advertisement
Performance Specifi cati ons
Membrane
Producti on
(151 LPD)
TDS Rejecti on
1
Recovery
Brine to Product
1
The percentage of the feed water available as reverse osmosis treated
water under normal operati ng conditi ons.
Tested at 60 psig (4 bar), 500ppm TDS municipal water, 77°F (25°C)
Dimensions and Weight
System - 9.72" W x 13.75" D x 15.38" H ( 24.7 x 34.9 x 39.1 cm), 11 lbs. (5 kg.)
Shipping Box - 14.5"L x 11.25"W x 20"H (36.8 x 28.6 x 50.8 cm), 13.7 lbs. (6.2 kg.)
I
L
K
J
)
(behind cover)
This system has been designed for installati on by a licensed professional such as a contractor or plumber. Proper completi on of this
installati on will require basic familiarity with standard sink plumbing and proper use of common hand and power tools. Improperly
installed systems could result in water damage due to leaks or fl ooding. Do not use with water that is microbiologically unsafe.
System Specifi cati ons
System w/Tank
40 GPD
21.6 GPD
(81.8 LPD)
95%
95%
26.3%
17%
2.8:1
4.86:1
D
G
F
M
H
B
C
(not shown)
A
41840-A McAlby Court, Murrieta, CA 92562
(800) 451-9343, email: sales@nimbuswater.com
Feed Water Requirements
Pressure
40-80 psi (275 kPa - 552 kPa)
Temp
40°F - 100°F (4°C - 38°C)
TDS
<2000 mg/L
Chlorine
<1.0 mg/L
Turbidity
<1 NTU
SDI
<5
pH
4-8
Feed water must be potable, municipal water. Must
be free of potenti al membrane foulants such as Iron,
Hydrogen Sulfi de and Manganese.
A. Product water storage tank
B. Tank valve
C. Tank tubing (3/8" white)
D. Air-gap faucet
E
E. Drain connecti on assembly
F. Drain tubing (3/8" white)
G. Quick connect fi tti ng
H. Drain tubing (1/4" black)
I.
Faucet tubing (3/8" blue)
J.
Four-stage desalinator
K. Feed water tubing (1/4" green)
L. Inlet fi tti ng with shut-off
M. Carbon post-fi lter
4
Advertisement
