Working With Detergents - Kärcher HD 2.3 CV Operator's Manual

Detergents can only be applied with
the black detergent nozzle.
STEP 1:
Install the black detergent nozzle for
detergent application (will work at
low pressure only).
STEP 2:
Fill a container with Kärcher deter-
gent. Place the lter end of detergent
suction tube into the container.
STEP 3:
With the engine running, pull trigger
to operate unit.
Liquid detergent is drawn into the
unit and mixed with water.
Apply detergent to work area.
Do not allow detergent to dry on sur-
face.
STEP 4:
Always draw fresh water through
the detergent suction tube when the
cleaning job is done, to rinse/ ush
any remaining dete rgents from the
injection system.
For best results see Cleaning Tips
for specific information on how to
clean different surfaces.
Detergents
CAUTION
This unit has been designed for use with
cleaning detergents recommended by
the manufacturer. The use of other clean-

WORKING WITH DETERGENTS

ing detergents may affect the operation of
the machine and void the warranty.
Always Use Kärcher Detergent for
Best Results
Kärcher Commercial detergents have been
speci cally formulated to work with your
pressure washer to help you clean more
quickly and thoroughly. Each one of our
proprietary blends comes with our exclusive
Pump and Coil Protection Formula designed
speci cally for use though high-pressure
cleaning equipment!
For a complete listing of detergents please
visit www.karchercommercial.com
or ask your local dealer.
CAUTION
Never use:
– Bleach, Chlorine products and other
corrosive chemicals
– Liquids containing solvents (i.e.,
paint thinners, gasoline, oils)
– Tri-sodium phosphate products
– Ammonia products
– Acid-based products
These chemicals will harm the unit and
will damage the surface being cleaned.
Use of these items will void the war-
ranty.
9
English