Working With Detergents - Kärcher G 2200 Owner's Manual

Table of Contents

Advertisement

25° spray angle = Green nozzle
For dirt accumulation over a large
surface.
40° spray angle = White nozzle
For moderate dirt accumulation over a
large surface.
Soap = Black nozzle
For operating with detergents or
cleaning with low pressure.
High pressure in nozzle area. Risk of
injury caused by improperly locked
nozzle.
▬ Make sure you hear the "click" when
inserting the nozzle tip into the quick
connection.
▬ Pull the nozzle to make sure it is
seated properly before operating your
unit.
To avoid serious injury never point
spray nozzle at yourself, other
persons or animals.

Working with Detergents

Detergents can only be applied with
the black detergent nozzle.
► Install the black detergent nozzle for
detergent application at low pressure.
► Fill a container with Kärcher
detergent. Place the filter end of
detergent suction tube into the
container.
12 English
► With the engine running, pull trigger
to operate unit.
► Liquid detergent is drawn into the unit
and mixed with water.
► Apply detergent to work area.
► Do not allow detergent to dry on
surface.
► Always flush the detergent bottle with
fresh water when the cleaning job is
done, to rinse/flush any remaining
detergents from the injection system.
NOTE: For best results see Cleaning
Tips for specific information on how to
clean different surfaces.
This unit has been designed for use
with cleaning detergents
recommended by the manufacturer.
The use of other cleaning detergent
may affect the operation of the
machine and void the warranty.
Always Use Kärcher Detergent for
Best Results.
Kärcher biodegradable detergents are
specially formulated to protect the
environment and your pressure

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents