Using The Accessories; Working With Detergents - Kärcher G 2500 DCE Operator's Manual

STEP 11:
Pull the starter handle. If the engine fails to
start after 3 pulls, squeeze the trigger gun to
release pressure, and repeat step.
Quick connect nozzles
The color-coded quick connect nozzles provide a
wide array of spray widths from 0° to 65° and are
easily accessible when placed in the convenient
nozzle holder.
0° spray angle = Red nozzle
For particularly stubborn accumulation of grime.
Not recommended for soft materials like sidings,
decks, painted surfaces, cars.
25° spray angle = Green nozzle
For dirt accumulation over a large surface.
40° spray angle = White nozzle
For moderate dirt accumulation over a large
surface.
Detergents can only be applied with the black
detergent nozzle.
STEP 1:
Install the black detergent nozzle for deter-
gent application at low pressure.
OPERATING INSTRUCTIONS

USING THE ACCESSORIES

WORKING WITH DETERGENTS

After the engine warms up enough to run
smoothly, move choke rod to OFF position.
For engine details see engine manual.
65° spray angle = Black nozzle
For operating with detergents or cleaning with
low pressure.
CAUTION
High pressure in nozzle area. Risk of injury
caused by improperly locked nozzle.
■
Make sure you hear the "click" when inserting
the nozzle tip into the quick connection.
■
Pull the nozzle to make sure it is seated
properly before operating your unit. (See
OPERATING INSTRUCTIONS: Step 1)
WARNING
To avoid serious injury never point spray
nozzle at yourself, other persons or animals.
STEP 2:
Fill a container with Kärcher detergent.Place
the fi lter end of detergent suction tube into
the container.
English 9