Working With Detergents - Kärcher K 3.000 Operator's Manual

Dirtblaster®
This nozzle features a 0º pencil jet which
n
rotates 360º for maximum dirt cutting action,
effectively increasing cleaning performance
up to 80%.
This nozzle combines the cleaning perfor-
mance of a 0º pencil jet with the surface
coverage of a wide angle nozzle.
Detergents can only be applied at low pres-
sure setting (Mix).
STEP 1:
Install the Vario Power Spray Wand.
Set the spray wand to the low pressure setting
(Mix).
STEP 2:
Fill the Detergent Tank with the selected
detergent.
STEP 3:
Turn on the pressure washer (I). Pull trigger
to operate unit. Liquid detergent is drawn into
the unit and mixed with water. Apply detergent
to work area. Do not allow detergent to dry
on surface.
USING THE ACCESSORIES

WORKING WITH DETERGENTS

Not recommended for soft materials, sid-
ing, painted surfaces, decks or autos.
STEP 4:
To rinse, move the VPS out of "Mix" position
and pull trigger to operate unit.
STEP 5:
Cleaning up: Always draw fresh water through
the detergent tank or siphon tube when done
to flush any remaining detergents from the
injection system.
For best results see Cleaning Tips for specific
information on how to clean different surfaces.
Always Use Kärcher ® Detergent for Best
Results.
Kärcher ® biodegradable detergents are specially
formulated to protect the environment and your
pressure washer. The special formula won't clog
the suction tube filter and will protect the internal
parts of the pressure washer for a longer life. For
Kärcher ® detergents, check your retailer or visit
our website:
www.buykarcher.com
CAUTION
Never use:
– Bleach, Chlorine products and other corrosive
chemicals
– Liquids containing solvents (i.e., paint thinners,
gasoline, oils)
– Tri-sodium phosphate products
– Ammonia products
– Acid-based products
These chemicals will harm the unit and will damage
the surface being cleaned.
Use of these items will void the warranty.
English 9