Working With Detergents - Kärcher G 3000K Operator's Manual

Turning the throttle lever to the right
can decrease the speed to get less
pressure.
When adjusting the engine throttle to
the lowest setting, do not operate the
pump. This can cause the engine to
stall due to lack of power.

Working with Detergents

NOTE: Detergents can only be applied
with the black detergent nozzle.
1. Install the black detergent nozzle for
detergent application at low pressure.
2. Fill the detergent tank with Kärcher
Brand Detergent.
3. With the engine running, pull trigger
to operate unit.
4. Liquid detergent is drawn into the unit
and mixed with water.
5. Apply detergent to work area.
6. Do not allow detergent to dry on
surface.
7. Always flush the detergent bottle with
fresh water when the cleaning job is
done, to rinse/flush any remaining
detergents from the injection system.
Detergent Tank
NOTE: For best results see Cleaning
Tips for specific information on how to
clean different surfaces.
This unit has been designed for use
with cleaning detergents
recommended by the manufacturer.
The use of other cleaning detergent
may affect the operation of the
machine and void the warranty.
Always Use Kärcher Detergent for
Best Results.
Kärcher biodegradable detergents are
specially formulated to protect the
environment and your pressure
washer. The special formula won't
clog the filter and will protect the
internal parts of the pressure washer
for a longer life. For Kärcher
Detergents, check your retailer or visit
our website:
www.karcherresidential.com
Never use:
● Bleach, chlorine products or other
corrosive chemicals.
● Liquids containing solvents (i.e., paint
thinners, gasoline, oils.)
● Tri-sodium phosphate products.
● Ammonia products.
● Acid-based products.
These chemicals will harm the unit
and will damage the surface being
cleaned.
Use of these items will void the
warranty.
English 13