PVI 1800/PVI 2500(Rev A)
IMPORTANT SAFETY INSTRUCTIONS
All electrical installations shall be done in accordance with the local and national electrical codes
ANSI/NFPA 70, NEC. The PVI 1800 and 2500 inverters are listed to UL1741/IEEE1547 (and
comply with IEEE 62.41).
The PVI 1800/PVI 2500 contains no user serviceable parts. Do not open the inverter case as this
will damage the NEMA4, IP65 seal.
Renewables authorized system installer for maintenance. (See page 44 or Solectria Renewables
website,
www.solren.com
installers.)
Before installing or using the PVI 1800/PVI 2500, please read all instructions and caution
markings in this manual and on the PVI 1800/PVI 2500 unit as well as the PV modules.
Connection of the PVI 1800/PVI 2500 to the electric utility grid must be done after receiving prior
approval from the utility company and performed only by qualified personnel.
Completely cover the surface of all PV-arrays with opaque (dark) material before wiring them or
use other methods to ensure safety from shock hazard. PV arrays produce electrical energy when
exposed to light and could create a hazardous condition.
SAVE THESE INSTRUCTIONS
Please contact Solectria Renewables or a Solectria
for Solectria Renewables contact information and authorized system
3
Installation and Operation Manual
DOCR-070570-A