CHAPTER 1 GETTING STARTED
1.7.3 Menu Setup
Programmable features of the Valor 2000 scales are contained in menus which are
accessed through the Display Panel's control switches. See the Instruction Manual for a full
description of the menus and how to access them.
Cal
Span
GEO
End
Figure 1-5. Menu structure
1.7.4 Menu Navigation
To enter the calibration menu, press and hold the Cal button for 5 seconds, [SpaN] will then
be displayed. Press Zero key to perform span calibration or press Cal key to proceed to
GEO settings. Press Zero key to enter GEO settings and then press Cal key to increase the
value. Press Zero key to confirm, [end] will be displayed. Press Zero key to exit the menu
and return to weighing mode.
Ohaus Corporation www.ohaus.com
1-8
Valor™ 2000/4000 Series Service Manual