Scale Operation Valor 4000; Overview Of The Controls - OHAUS VALOR 4000 Service Manual

SCALE OPERATION – VALOR 4000
1.6
This section contains information on the basic operation of the Valor 4000 scale.

1.6.1 OVERVIEW OF THE CONTROLS

Button
Notes:
1 Short Press: Press less than 2.5 seconds.
2 Long Press: Press and hold for more than 2.5 seconds.
3 Press and hold the On/Zero Off button until OFF is displayed, then release the button.
4 The IR sensor can be activated by a hand or other object that is placed at a
specified height above the sensor location. The sensor activation distance will vary
based on the reflective nature of the object. If unwanted activations occur due to
unique situations the sensor can be turned off.
Valor™ 2000/4000 Series Service Manual
Figure 1-1. Valor 4000 Front Display with controls.
TABLE 1-3. Control functions Valor 4000
Functions
1
Short Press (when on): Sets display to zero
2
Long Press (when off): Turns scale on
(when on): Turns the scale off
Short Press (in Menu): Selects / accepts displayed setting
Short Press: Accumulates the weight or displays the
accumulated information at 0 load.
Long Press: Toggles through active Units
Short Press (in Menu): Toggles through available settings
Short Press: Initiates an application mode specific response
Long Press: Selects active Mode
Short Press (in Menu): returns to previous settings
Short Press: Enter / clear a Tare value
Long Press: Enters User Menu
Short Press (in Menu): Quickly exit User Menu
4 can be programmed to act as "touchless" button. See
IR Sensor
the User Menu section 4.3 for the available settings.
CHAPTER 1 GETTING STARTED
1-3 Ohaus Corporation www.ohaus.com
3