Ordering Spare Parts - ESAB T6 Instruction Manual

GB
Fault Description
code1
23 Receiver buffer overflow
CAN messages are being received at a higher rate than the welding data board can hand-
le.
The current activity stops.
Action: Review the handling of welding programs during welding.
26 Watchdog
Something has prevented the processor from performing its normal duties.
This fault does not disable any functions.
Action: Review the handling of welding programs during welding.
28 Stack overflow
The internal memory has become overfilled.
This fault can be caused by abnormal processor loading.
Action: Review the handling of settings data during welding.
29 No cooling water flow
The flow monitor switch has operated.
The current activity stops.
Action: Check the cooling water circuit and the pump.
31 No reply from the display unit
The microprocessor is not receiving replies from the display board.
Action: Send for a service technician.
32 No gas flow
Gas flow is less than 6 l/min.
Action: Check the gas valve, hoses and connectors.
9

ORDERING SPARE PARTS

Note!
All guarantee undertakings from the supplier cease to apply if the customer himself
attempts any work in the product during the guarantee period in order to rectify any
faults.
Spare parts may be ordered through your nearest ESAB dealer, see the last page of
this publication.
bi05mfe8
- - 44 - -