Safety Information - Martin JEM K1 Hazer User Manual

Table of Contents

Advertisement

Safety information

READ AND SAVE THESE INSTRUCTIONS
The following symbols are used to identify important safety information:
Caution! Safety
hazard. Risk of
personal injury.
Warning! This product is not for household use. It presents risks of injury due to
electric shock, burns, falls and respiratory problems!
Before operating the machine – Read and retain these Instructions
Avant l'opération – Lire et conserber ces instructions
Read this manual before operating the machine, follow the safety precautions
listed below, and observe all warnings in this manual and printed on the
machine. Use the system only as described in this manual and in accordance
with local laws and regulations.
If you have questions about how to operate the machine safely, or if you have
followed the instructions in this manual and the machine is malfunctioning,
please contact Martin Service.
P r e v e n t i n g e l e c t r i c s h o c k s
Always ground (earth) the machine electrically.
Use only a source of AC power that complies with local building and
electrical codes, and that has both overload-and ground-fault protection.
Before connecting the JEM K1 Hazer to power, check that the voltage
indicated on the machine's serial label matches your local AC power
voltage. If your AC power voltage does not match, do not use the
machine. Contact Martin Service for assistance.
Before using the machine, check that all power distribution equipment
and cables are in perfect condition and rated for the current
requirements of all connected devices.
If the machine or any cables connected to it are in any way damaged,
defective, wet, or show signs of overheating, stop using the machine
and contact Martin Service for assistance. If the supply cord is
damaged, it must be replaced by a special cord or assembly available
from the manufacturer or its service agent.
Disconnect the machine from AC power before servicing and when not
in use.
Caution! Burn
Danger!
hazard. Hot
Hazardous
surface. Do not
voltage. Contact
touch.
will cause electric
shock.
Safety information
Caution! Fire
hazard.
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents