Table of Contents
Advertisement
Control settings
O v e r v i e w
By selecting either ECO / PRE1/ PRE2 from the Fast Access buttons below the
digital display at the rear of the unit allow you to quickly turn the haze on or off
at three different settings.
The digital display allows you to configure all options of the machine using
menus, if you need more detailed control.
Digital display
Menu previous/next
buttons
F a s t A c c e s s b u t t o n s
The four Fast Access buttons allow you to quickly set the machine to one of
three haze output levels and a Silent mode (SLNT). The display shows the
current setting.
If you press the same button again, haze output will stop and the machine will
go back to Ready mode. (SLNT) mode returns to previous state.
Fast Access
Mode
S e t t i n g h a z e d e n s i t y
Use the Menu Previous / Next buttons to select the option.
Use the Up/Down buttons to select the density from – .
Press the Enter button to store the haze setting. The display shows .
The machine will only produce haze if the RUN menu is set to TIME or CONT.
(Or, if using the digital remote, if you press the Timer or Haze buttons).
Haze and Fan settings
Drops Fan levels by 30% relative to
current values
Haze 5%, Fan 5%
Haze 50%, Fan 50%
Haze 100%, Fan 100%
If you want to temporarily change the haze density, do not press Enter.
The haze setting will go back to its stored value next time the machine
is powered up. This applies to all options.
Control settings
Enter/store button
Value down/up
buttons
DMX Value Equivalent
CH1
CH2
Reduce by 30%
-
of current value
30
11
120
110
219
219
11
Hide quick links:
Advertisement
Table of Contents
