Putting Into Operation - Kranzle 2160 TS Operating Manual

14

Putting into operation

Setting up – Location
Neither set up or operate the machine in rooms where there
is a risk of fire or explosion nor put it into puddles. Do not
use the machine under water.
1.
Move high-pressure cleaner to the
job site.
The Kränzle 2160 / 2195 / 2175 are
movable machines with sturdy trolleys
ideally suited for difficult terrain and stairs.
Never pull the machine if the water
supply hose is still connected!
2.
Check water inlet filter for
cleanliness prior to putting the machine
into operation!
Manually unscrew hose attachment. Take
out the serial water inlet filter using needle
nose pliers and clean if filter is soiled.
3
. Each time check oil level at the oil
dipstick prior to putting the HP cleaner
into operation. (Take care that cleaner is
in horizontal position!)
The oil level must show between the two
markings.
4.
Put up machine. Release fixing screw
from hexagonal base of hose drum, put
tiltable handle onto the hexagonal base
and fix with screw.