Direct Suction - Kranzle 2160 TS Operating Manual

Direct suction

Due the suction capacity of its pump (up to 2.5 m suction height, max. hose length 3 m)
this high-pressure cleaner can suck in water for cleaning purposes from separate
containers or ponds.
Prior to starting the first suction the pump resp. the
suction hose has to be filled with water!
F
Note
Depending on the water quality it may occur after a prolonged standstill that the valves
get sticky. Consequently the machine cannot properly suck in water from a container.
In this case connect a hose with pressurized water to the pump inlet. Having started the
machine the pressurized water opens the valves and the machine resumes sucking in
water from the container. Now you can carry on with your cleaning task as usual.
1.
Mount suction hose with suction filter
(Kränzle accessories No. 15.038 3). When
using other hoses the inner cross section
of the hose must be at least 3/4" = 16 mm.
2.
Fill suction hose with water.
3.
Put filled suction hose into the
container and start the cleaning job.
Use clean water only!
Never suck in water containing
chlorine.
17