Activitylog - DataCard CE870 Installation And Administrator's Manual

ActivityLog

The ActivityLog settings allow you to record technical information about the printer. WebAdmin
or WebService access-level users can change settings in the activity log to help troubleshoot and
isolate a card production problem. You specify the types of actions to include in the logs and set
the severity level for when the action should be written to the log. Filter severity level options
include: Critical, Error, Warning, Notice, Information, Debug, Disabled.
Description
1) ExternalLog
2) ExternalLogServer
3) FilterCardActions
4) FilterConfigChanges
5) FilterJobStates
6) FilterSoapMsgs
7) FilterSystem
8) InternalLog
ExternalLog—Enable or disable writing the activity log to an external Syslog server.

ExternalLogServer—Specify the IP address of the external Syslog server if you are writing to

an external log (ExternalLog is set to Enabled).
FilterCardActions—Write the start and completion of a card action with the specified

severity, and higher, to the activity log.
FilterConfigChanges—Write configuration change actions with the specified severity, and

higher, to the activity log.
FilterJobStates—Write changes to the state of a print or exception job with the specified

severity, and higher, to the activity log.
FilterSoapMsgs—Write DPCL/Soap (Simple Object Access Protocol) messages from the

printer with the specified severity, and higher, to the activity log.
FilterSystem—Write system information with the specified severity, and higher, to the

activity log. A value of Information results in most events being written to the log.
InternalLog—Enable or disable the activity log on the printer.

CE870 Instant Issuance System Installation and Administrator's Guide
Default Value Current Value (unit)
Disabled Disabled
0.0.0.0 0.0.0.0
Notice Notice
Notice Notice
Notice Notice
Notice Notice
Notice Notice
Enabled Enabled
73